You are hereLittleFe v4d-modified Parts List

LittleFe v4d-modified Parts List

These are the parts used to build the LittleFe v4d units modified for Hadoop/HBase. This design comes from Dr. David Monismith of Northwest Missouri State University. It takes as a starting point the LittleFe v4d parts list.

Item Count
Aluminum frame kit (custom item from LittleFe/BCCD team) 1
Low-voltage wiring harness (custom item from LittleFe/BCCD team) 1
ASRock IMB-151D Bay Trail Thin Mini-ITX Motherboard with J1900 Celeron 6
4GB 204-Pin DDR3 SO-DIMM DDR3 1333 (Low power <1.35V) 12
Solidtek KB-5010BU 13.31" Mini Keyboard with Trackball Mouse 1
New A Pair of Laptop Notebook Wifi Bluetooth WWAN Broadband Internal Antenna 1
Intel 6200 Dell Intel 6200 IEEE 2.4GHZ-5GHZ 802.11n Wi-Fi Adapter - Half Size Mini PCI Express Card - 300Mbps 1
AnkerĀ® Unibody Aluminum USB 3.0 to RJ45 Gigabit Ethernet Adapter Supporting 10/100/1000 Mbps Ethernet [RTL8153 Chipset] 1
Samsung 840 Pro 512 GB SSD 1
Samsung 840 Pro 256 GB SSD 5
ASUS GX-D1081 V3 1
Pelican 1610 1
Meanwell PB-360P-12 1
1.5ft Cat6 Ethernet Cable - 550MHz UTP Bare Copper, Red 5
1.5ft Cat6 Ethernet Cable - 550MHz UTP Bare Copper, Gray 1
TeckNetĀ® Basic 3-Button 3D optical USB Wired Mouse 1
C2G / Cables to Go 03134 18 AWG Universal Power Cord for NEMA 5-15P to IEC320C13, Black (10 Feet/3.04 Meters) 1
10inch SATA 6Gbps Cable w/Locking Latch - Neon Blue 6
Female 15-pin SATA power to female 4-pin fdd power connector 6